Identity area
Reference code
Title
Date(s)
- 1995 (Creation)
Level of description
Extent and medium
Object
Context area
Repository
Archival history
Immediate source of acquisition or transfer
Content and structure area
Scope and content
A prototype magnet support for the Large Hadron Collider (LHC). The magnet supports have to bridge a difference in temperature of 300 degrees. Electrical connections, instrumentation and the posts on which the magnets stand are the only points where heat transfer can happen through conduction. They are all carefully designed to draw off heat progressively. The posts are made of 4 mm thick glass-fibre– epoxy composite material. Each post supports 10 000 kg of magnet and leaks just 0.1 W of heat. This piece required a long development period which started in the early ’90s and continued until the end of the decade. The wires next to the support post are wires from strain gauges, which are employed to measure the stress level in the material when the support is mechanically loaded. These supports are mechanically optimized to withstand a weight of up to 100Kn (10 tons) while being as thin as possible to minimize conduction heat to magnets. This is the reason why the stress measurement was extensively done in the prototyping phase.
Appraisal, destruction and scheduling
Accruals
System of arrangement
Conditions of access and use area
Conditions governing access
Public
Conditions governing reproduction
Language of material
Script of material
Language and script notes
Physical characteristics and technical requirements
26cm 33cm 7kg
Finding aids
Allied materials area
Existence and location of originals
Available, 282.
