Item CERN-OBJ-AC-066 - LHC beampipe section

Zona de identificação

Código de referência

Heritage collection CERN-OBJ-CERN-OBJ-AC-066

Título

LHC beampipe section

Data(s)

Nível de descrição

Item

Dimensão e suporte

Object

Zona do contexto

Entidade detentora

História do arquivo

Fonte imediata de aquisição ou transferência

Zona do conteúdo e estrutura

Âmbito e conteúdo

A short section of the LHC beam-pipe including beam screen. In the LHC, particles circulate under vacuum. The vacuum chamber can be at room temperature (for example, in the experimental areas), or at cryogenic temperature, in the superconductive magnets. This piece is located in the superconductive magnets. The outer pipe is the vacuum chamber, which is in contact with the magnets, at cryogenic temperature (1.9K). It is called the “cold bore”. The inner tube is the beam screen. Its main goal is to protect the magnets from the heat load coming from the synchrotron radiation. Indeed, when high energy protons’ trajectory is bent, photons are emitted by the beam. They are intercepted by the beam screen. The temperature of the beam screen is kept between 5 and 20K by a circulation of gaseous helium in the small pipes on both sides of the beam screen. As those surfaces are at cryogenic temperature. The residual gas present in the accelerator is sticking on the surfaces. This phenomenon called “adsorption” is used to maintain a very low pressure in the vacuum chamber of the accelerator. About materials: The cold bore is in stainless steel. The beam screen is in stainless steel with colaminated copper. Both those material have a low outgassing rates, which means that they release few molecules in the vacuum chamber. About beam and impedance: The goal of the copper, which has a good electrical conductivity, is to facilitate the circulation of the image current. The beam is composed of charged particules circulating: it is an electric current. When it is circulating, an image current is produced. It is called induction. If the image current cannot circulate properly, the beam is slowed down. About adsorption process: When the beam circulates, photons from synchrotron radiation are emitted and hit the beam screen. By doing so, they desorb molecules from the walls. The molecules are then pumped down on the outer pipe (where they cannot be reached by the photons anymore), through the small holes in the beam screen.

Avaliação, seleção e eliminação

Incorporações

Sistema de arranjo

Zona de condições de acesso e utilização

Condições de acesso

Public

Condiçoes de reprodução

Idioma do material

    Sistema de escrita do material

      Notas ao idioma e script

      Características físicas e requisitos técnicos

      5.5cm 32cm 1kg

      Instrumentos de descrição

      Zona de documentação associada

      Existência e localização de originais

      Available, 33-S-015.

      Existência e localização de cópias

      Unidades de descrição relacionadas

      Descrições relacionadas

      Zona das notas

      Identificador(es) alternativo(s)

      CDS number

      2290375

      Pontos de acesso

      Pontos de acesso - Assuntos

      Pontos de acesso - Locais

      Pontos de acesso - Nomes

      Pontos de acesso de género

      Identificador da descrição

      Identificador da instituição

      Regras ou convenções utilizadas

      Estatuto

      Nível de detalhe

      Datas de criação, revisão, eliminação

      Línguas e escritas

        Script(s)

          Fontes

          Área de ingresso